Hirschmann RS20

CLI L2P
Release 7.0 05/2011
4.9 Device Configuration Commands
191
4.9.27 rmon-alarm modify startup-alarm
This command modifies the startup-alarm of an RMON alarm.
Format
rmon-alarm modify <index> startup-alarm
{rising | falling | risingorfalling}
Mode
Global Config
index
Enter the index of the RMON alarm.
rising
Start-up alarm if the value is rising.
falling
Start-up alarm if the value is falling.
risingorfalling
Start-up alarm if the value is rising or falling.