Hirschmann RS20 Reference Manual

320
4.12 LLDP - Link Layer Discovery Protocol
CLI L2P
Release 7.0 05/2011
4.12.24lldp chassis tx-interval
Configure the interval at which LLDP frames are transmitted on behalf of this
LLDP agent (unit: seconds, min.: 5 sec., max.: 32768 sec., default: 30 sec.)
Format
lldp chassis tx-interval <tx interval>
Mode
Global Config
Tx-interval
Configure the interval at which LLDP frames are transmitted on behalf
of this LLDP agent (unit: seconds, min.: 5 sec., max.: 32768 sec.,
default: 30 sec.).
4.12.25clear lldp config all
Clear the LLDP configuration, i. e., set all configurable parameters to default
values (all chassis- as well as port-specific parameters at once).
Note: LLDP Remote data remains unaffected.
Format
clear lldp config all
Mode
Privileged EXEC

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16