Hirschmann RS20 Reference Manual

CLI L2P
Release 7.0 05/2011
4.13 SNTP - Simple Network Time Protocol
335
4.13 SNTP - Simple Network
Time Protocol
These commands show and configure the SNTP parameters.
4.13.1 show sntp
This command shows all SNTP settings.
Format
show sntp
Mode
Privileged EXEC and User EXEC
SNTP Server Anycast Address
Show SNTP Server Anycast Address (a.b.c.d).
SNTP Server Anycast Transmit Interval
Show SNTP Anycast Transmit Interval (in seconds).
SNTP Server Anycast VLAN
Show SNTP Server Anycast VLAN.
SNTP Server Disable if Timesource is local
Show SNTP Server Disable if Timesource is local (Yes/No).
SNTP Client Accepts Broadcasts
Show SNTP Client Accepts Broadcasts (Yes/No).
SNTP Client Disable after Synchronization
Show SNTP Client Disable after Synchronization (Yes/No).
SNTP Client Request Interval
Show SNTP Client Request Interval (in seconds).

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16