Hirschmann RS20

CLI L2P
Release 7.0 05/2011
4.9 Device Configuration Commands
187
4.9.19 rmon-alarm add
This command adds an RMON alarm.
Format
rmon-alarm add <index>
[<mib-variable>
<rising-threshold>
<falling-threshold>]
Mode
Global Config
index
Enter the index of the RMON alarm.
mib-variable
Enter the MIB variable.
rising-threshold
Enter the rising threshold for the RMON alarm.
falling-threshold
Enter the falling threshold for the RMON alarm.
4.9.20 rmon-alarm delete
This command deletes an RMON alarm.
Format
rmon-alarm delete <index>
Mode
Global Config
index
Enter the index of the RMON alarm.