Hirschmann RS20 Reference Manual

CLI Commands: Base
98
4.6 Management Commands
CLI L2P
Release 7.0 05/2011
4.6.4 session-limit
This command specifies the maximum number of simultaneous outbound
telnet sessions. A value of 0 indicates that no outbound telnet session can be
established.
Default
4
Format
session-limit <0-5>
Mode
Line Config
U no session-limit
This command sets the maximum number of simultaneous outbound tel-
net sessions to the default value.
Format
no session-limit
Mode
Line Config

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16