Hirschmann RS20 Reference Manual

CLI L2P
Release 7.0 05/2011
4.10 User Account Management Commands
275
4.10.9 users snmpv3 accessmode
This command specifies the snmpv3 access privileges for the specified login
user. The valid accessmode values are readonly or readwrite. The
<username> is the login user name for which the specified access mode
applies. The default is readwrite for ‘admin’ user; readonly for all other
users
Default
admin -- readwrite; other -- readonly
Format
users snmpv3 accessmode <username> <readonly |
readwrite>
Mode
Global Config
U no users snmpv3 accessmode
This command sets the snmpv3 access privileges for the specified login
user as readwrite for the ‘admin’ user; readonly for all other users.
The <username> is the login user name for which the specified access
mode will apply.
Format
no users snmpv3 accessmode <username>
Mode
Global Config

Hirschmann RS20 Specifications

General

Brand	Hirschmann
Model	RS20
Category	Switch
Language	English