Hirschmann RS20 Reference Manual

352
4.14 PTP - Precision Time Protocol
CLI L2P
Release 7.0 05/2011
4.14.2 show ptp configuration
This command shows the configured PTP (IEEE 1588) values depending on
the currently configured clock mode.
Format
show ptp configuration
Mode
Privileged EXEC and User EXEC
PTP (Global) Clock Mode
Show which PTP clock mode is currently configured.
PTP (Global) Sync. Upper Bound
Show the upper bound for the PTP clock synchronization status
(unit: nanoseconds).
PTP (Global) Sync. Lower Bound
Show the lower bound for the PTP clock synchronization status
(unit: nanoseconds).
4.14.3 show ptp operation
Show the global PTP (IEEE 1588) operation setting (the administrative set-
ting).This command shows if PTP is enabled/disabled on this device.
Format
show ptp operation
Mode
Privileged EXEC and User EXEC

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16