178
4.9
Device Configuration Commands
CLI L2P
Release
7.0
05/2011
4.9.10 macfilter adddest
This command adds the interface to the destination filter set for the MAC filter
with the given <macaddr> and VLAN of <vlanid>. The <macaddr> parameter
must be specified as a 6-byte hexadecimal number in the format of
b1:b2:b3:b4:b5:b6.
The <vlanid> parameter must identify a valid VLAN (1-4042).
Format
macfilter adddest <macaddr> <vlanid>
Mode
Interface Config
U no macfilter adddest
This command removes a port from the destination filter set for the MAC
filter with the given <macaddr> and VLAN of <vlanid>. The <macaddr>
parameter must be specified as a 6-byte hexadecimal number in the for-
mat of b1:b2:b3:b4:b5:b6.
The <vlanid> parameter must identify a valid VLAN (1-4042).
Format
no macfilter adddest <macaddr> <vlanid>
Mode
Interface Config
To Next Page
Loading...
