Hirschmann RS20 Reference Manual

CLI Commands: Security
CLI L2P
Release 7.0 05/2011
491
6 CLI Commands: Security
This chapter provides a detailed explanation of the Security commands. The
following Security CLI commands are available in the software Switching
Package. Use the security commands to configure security settings for login
users and port users.
The commands are divided into these different groups:
D Show commands are used to display device settings, statistics and other
information.
D Configuration Commands are used to configure features and options of
the switch. For every configuration command there is a show command
that will display the configuration setting.

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16