Hirschmann RS20

CLI L2P
Release 7.0 05/2011
4.9 Device Configuration Commands
241
4.9.81 spanning-tree bpdumigrationcheck
This command enables BPDU migration check on a given interface.
This will force the specified port to transmit RST or MST BPDUs.
The all option enables BPDU migration check on all interfaces.
Format
spanning-tree bpdumigrationcheck {<slot/port>|all}
Mode
Global Config
U no spanning-tree bpdumigrationcheck
This command disables BPDU migration check on a given interface. The
all option disables BPDU migration check on all interfaces.
Format
no spanning-tree bpdumigrationcheck {<slot/
port>|all}
Mode
Global Config