Hirschmann RS20 Reference Manual

CLI Commands: Base
CLI L2P
Release 7.0 05/2011
4.6 Management Commands
151
4.6.66 snmp-server enable traps stpmode
This command enables the sending of new root traps and topology change
notification traps.
Default
enabled
Format
snmp-server enable traps stpmode
Mode
Global Config
U no snmp-server enable traps stpmode
This command disables the sending of new root traps and topology
change notification traps.
Format
no snmp-server enable traps stpmode
Mode
Global Config

Hirschmann RS20 Specifications

General

Brand	Hirschmann
Model	RS20
Category	Switch
Language	English