CLI L2P
Release
7.0
05/2011
4.9
Device Configuration Commands
265
4.9.109voice vlan dot1p
Use this command to configure Voice VLAN 802.1p priority tagging for voice
traffic.
Format
voice vlan dot1p <priority>
Mode
Interface Config
<priority>
Configure Voice VLAN 802.1p priority tagging for voice traffic.
The priority tag range is 0–7.
4.9.110voice vlan none
Use this command to allow the IP phone to use its own configuration to send
untagged voice traffic.
Format
voice vlan none
Mode
Interface Config