Hirschmann RS20 Reference Manual

CLI Commands: Base
146
4.6 Management Commands
CLI L2P
Release 7.0 05/2011
4.6.61 snmp-server enable traps chassis
Configures whether traps that are related to the chassis functionality of the
switch will be sent. These functions include the signal contacts, the ACA,
temperature limits exceeded, changes in the module map, addition or
removal of SFP modules, status of power supply has changed and the LLDP
and SNTP features. May be enabled or disabled.
Default: enabled.
Default
enabled
Format
snmp-server enable traps chassis
Mode
Global Config
U no snmp-server enable traps chassis
This command disables chassis traps for the entire switch.
Format
no snmp-server enable traps chassis
Mode
Global Config

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16