254
4.9
Device Configuration Commands
CLI L2P
Release
7.0
05/2011
4.9.98 vlan name
This command changes the name of a VLAN. The name is an alphanumeric
string of up to 32 characters, and the ID is a valid VLAN identification number.
ID range is 1-4042.
Default
The name for VLAN ID 1 is always Default. The name for other
VLANs is defaulted to a blank string.
Format
vlan name <1-4042> <newname>
Mode
VLAN database
U no vlan name
This command sets the name of a VLAN to a blank string. The VLAN ID
is a valid VLAN identification number. ID range is 1-4042.
Format
no vlan name <1-4042>
Mode
VLAN database
To Next Page
Loading...
