Hirschmann RS20 Reference Manual

CLI L2P
Release 7.0 05/2011
4.9 Device Configuration Commands
183
Mode
Global Config
session-id
Session number (currently, session number 1 is supported).
4.9.15 link-aggregation
This command configures a new Link Aggregation (LAG) and generates a
logical slot/port number for the Link Aggregation. Display this number using
the “show link-aggregation”.
Note: Before including a port in a Link Aggregation, set the port physical
mode. See ‘speed’ command.
Format
link-aggregation <name>
Mode
Global Config

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16