260
4.9
Device Configuration Commands
CLI L2P
Release
7.0
05/2011
4.9.104vlan port tagging all
This command configures the tagging behavior for all interfaces in a VLAN to
enabled. If tagging is enabled, traffic is transmitted as tagged frames. If tag-
ging is disabled, traffic is transmitted as untagged frames. The ID is a valid
VLAN identification number.
Format
vlan port tagging all <1-4042>
Mode
Global Config
U no vlan port tagging all
This command configures the tagging behavior for all interfaces in a
VLAN to disabled. If tagging is disabled, traffic is transmitted as
untagged frames. The ID is a valid VLAN identification number.
Format
no vlan port tagging all <1-4042>
Mode
Global Config
To Next Page
Loading...
