CLI L2P
Release
7.0
05/2011
4.9
Device Configuration Commands
233
Tagging
Select the tagging behavior for this port in this VLAN.
Tagged - specifies to transmit traffic for this VLAN as tagged
frames.
Untagged - specifies to transmit traffic for this VLAN as untagged
frames.
4.9.73 show vlan brief
This command displays a list of all configured VLANs.
Format
show vlan brief
Mode
Privileged EXEC and User EXEC
VLAN ID
There is a VLAN Identifier (vlanid )associated with each VLAN. The
range of the VLAN ID is 1 to 4042.
VLAN Name
A string associated with this VLAN as a convenience. It can be up to
32 alphanumeric characters long, including blanks. The default is
blank. VLAN ID 1 always has a name of `Default`. This field is
optional.
VLAN Type
Type of VLAN, which can be Default, (VLAN ID = 1), a static (one that
is configured and permanently defined), or a Dynamic (one that is
created by GVRP registration).
VLAN Creation Time
Displays the time (as the system time up time) when the VLAN was
created.
To Next Page
Loading...
Need help?
General
