Hirschmann RS20 Reference Manual

CLI Commands: Base
CLI L2P
Release 7.0 05/2011
4.6 Management Commands
147
4.6.62 snmp-server enable traps l2redundancy
Indicates whether traps that are related to the layer 2 redundancy features of
the switch will be sent. The HiPER-Ring and the Redundant Coupling will tell
you with these traps when the main line has become inoperative or returned.
May be enabled or disabled.
Default: enabled.
Default
enabled
Format
snmp-server enable traps l2redundancy
Mode
Global Config
U no snmp-server enable traps l2redundancy
This command disables layer 2 redundancy traps for the entire switch.
Format
no snmp-server enable traps l2redundancy
Mode
Global Config

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16