Hirschmann RS20 Reference Manual

CLI Commands: Base
CLI L2P
Release 7.0 05/2011
4.8 Scripting Commands
169
4.8.4 script show
This command displays the contents of a script file. The parameter <script-
name> is the name of the script file.
Format
script show <scriptname>
Mode
Privileged EXEC
The format of display is
Line <no>: <Line contents>
4.8.5 script validate
This command validates a script file by parsing each line in the script file
where <scriptname> is the name of the script to validate.The validate option
is intended to be used as a tool for script development.
Validation identifies potential problems. It may or may not identify all prob-
lems with a given script on any given device.
Format
script validate <scriptname>
Mode
Privileged EXEC

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16