Hirschmann RS20 Reference Manual

CLI Commands: Switching
484
5.9 Sub-Ring Commands
CLI L2P
Release 7.0 05/2011
info
Display status information for the given Sub-Ring ID.
mode
Display the switch's mode for the given Sub-Ring ID.
operation
Display the switch's operative setting for the given Sub-Ring ID.
Note: in case of configuration problems, this value may differ from the
administrative setting (may become 'Disabled').
protocol
Display the switch's protocol setting for the given Sub-Ring ID.
Note: in case of configuration problems, this value may differ from the
administrative setting (may become 'Disabled').
port
Display the ports for the given Sub-Ring ID.
summary
Display a summary for the given Sub-Ring ID.
ring-name
Display ring name for the given Sub-Ring ID.
vlan
Display the VLAN ID for the given Sub-Ring ID.
mrp-domainID
Display the MRP domain ID for the given Sub-Ring ID.
partner-mac
Display the partner MAC for the given Sub-Ring ID.

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16