Hirschmann RS20 Reference Manual

Command Structure
CLI L2P
Release 7.0 05/2011
1.1 Format
29
The commands with strings that may contain these special characters are
listed below.
Note: Not every string is allowed to contain special characters. The string
that is output with the escape characters (if necessary) is shown as "...".
Command Note
!System Description "..." "At the beginning of the script
!System Version "..." "At the beginning of the script
Tab. 4: Commands in Privileged Exec mode
Command Note
snmp-server location "..."
snmp-server contact "..."
snmp-server community "..."
snmp-server community ipaddr <ip> "..."
snmp-server community ipmask <ip> "..."
snmp-server community ro "..."
snmp-server community rw "..."
no snmp-server community mode "..."
no snmp-server community "..."
link-aggregation "..."
spanning-tree configuration name "..."
ptp subdomain-name "..."
Tab. 5: Commands in Global Config mode
Command Note
name "..."
Tab. 6: Commands in Interface Config mode

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16