Hirschmann RS20 Reference Manual

CLI L2P
Release 7.0 05/2011
4.12 LLDP - Link Layer Discovery Protocol
315
mgmt-addr | profinetio-port-info |
port-desc | port-id | summary | sys-desc |
sys-name | vlan-info
Mode
Privileged EXEC and User EXEC
chassis-id
Display the remote data's chassis ID only.
detailed
Display remote data in detailed format (i. e., all available data).
Note: most important data is output first (not in alphabetic order of
command names). This is the default command if no specific
command is given.
ether-port-info
Display the remote data's port Ethernet properties only (group com-
mand, outputs: Port Autoneg. Supported, Port Autoneg. Enabled,
Port Autoneg. Advertized Capabilities and Port Operational MAU
Type).
inlinepower
Displays the remote port's Power over Ethernet capabilities (PoE,
IEEE 802.3af). Included are if the remote device is a PSE (Power
Source Device) or a PD (Powered Device), if PoE is supported and if
the power pairs are selectable.
link-aggregation-info
Display the remote data's link aggregation information only (group
command, outputs: Link Agg. Status and Link Agg. Port ID).
mgmt-addr
Display the remote data's management address only.
profinetio-port-info
Display the remote data's Port ProfinetIO properties only.
port-desc
Display the port's LLDP TLV inclusion of Port Description.
port-id
Display the remote data's port ID only.

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16