Hirschmann RS20 Reference Manual

CLI Commands: Switching
396
5.1 Spanning Tree Commands
CLI L2P
Release 7.0 05/2011
Root Port Identifier
Identifier of the port to access the Designated Root for the CST.
Root Port Max Age
Derived value
Root Port Bridge Forward Delay
Derived value
Hello Time
Configured value
Bridge Hold Time
Minimum time between transmission of Configuration Bridge Protocol
Data Units (BPDUs)
CST Regional Root
Bridge Identifier of the CST Regional Root. It is made up using the
bridge priority and the base MAC address of the bridge.
Regional Root Path Cost
Path Cost to the CST Regional Root.
Associated FIDs
List of forwarding database identifiers currently associated with this instance.
Associated VLANs
List of VLAN IDs currently associated with this instance.
U show spanning-tree brief
When the “brief” optional parameter is included, this command displays a
brief overview of the spanning tree settings for the bridge. In this case, the
following details are displayed.
Bridge Priority
Configured value.
Bridge Identifier
The bridge identifier for the selected MST instance. It is made up
using the bridge priority and the base MAC address of the bridge.

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16