Hirschmann RS20 Reference Manual

CLI Commands: Security
494
6.1 Security Commands
CLI L2P
Release 7.0 05/2011
U no authentication login
This command deletes the specified authentication login list.
You will be unable to delete if any of the following conditions are true:
D The login list name is invalid or does not match an existing
authentication login list
D The specified authentication login list is assigned to any user or to the
non configured user for any component
D The login list is the default login list included with the default
configuration and was not created using ‘authentication login’.
The default login list cannot be deleted.
Format
no authentication login <listname>
Mode
Global Config

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16