Hirschmann RS20 Reference Manual

CLI Commands: Security
526
6.1 Security Commands
CLI L2P
Release 7.0 05/2011
Reauthentication Enabled
Indicates if reauthentication is enabled on this port. Possible values
are ‘True” or “False”.
Key Transmission Enabled
Indicates if the key is transmitted to the supplicant for the specified
port. Possible values are True or False.
Control Direction
Indicates the control direction for the specified port or ports. Possible
values are both or in.
Maximum Users
Display the value of Maximum Users.
Unauthenticated VLAN ID
Display the value of Unauthenticated VLAN ID
Session Timeout
Display the value of Session Timeout
Session Termination Action
Display the value of Session Termination Action
MAC-Authorized-Bypass
Display the value of MAC-Authorized-Bypass
If the optional parameter 'statistics <slot/port>' is used, the dot1x statistics for
the specified port are displayed.
Port
The interface whose statistics are displayed.
EAPOL Frames Received
The number of valid EAPOL frames of any type that have been
received by this authenticator.
EAPOL Frames Transmitted
The number of EAPOL frames of any type that have been transmitted
by this authenticator.

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16