Hirschmann RS20 Reference Manual

CLI Commands: Base
CLI L2P
Release 7.0 05/2011
4.1 System Information and Statistics Com-
63
Upstream Threshold - The number of frames discarded due to lack
of cell descriptors available for that packet's priority level.
Packets Transmitted Octets
Total Bytes - The total number of octets of data (including those in
bad packets) transmitted into the network (excluding framing bits but
including FCS octets). This object can be used as a reasonable esti-
mate of ethernet utilization. If greater precision is desired, the ether-
StatsPkts and etherStatsOctets objects should be sampled before
and after a common interval. -----
Packets Transmitted 64 Octets - The total number of packets
(including bad packets) transmitted that were 64 octets in length
(excluding framing bits but including FCS octets).
Packets Transmitted 65-127 Octets - The total number of packets
(including bad packets) transmitted that were between 65 and 127
octets in length inclusive (excluding framing bits but including FCS
octets).
Packets Transmitted 128-255 Octets - The total number of packets
(including bad packets) transmitted that were between 128 and 255
octets in length inclusive (excluding framing bits but including FCS
octets).
Packets Transmitted 256-511 Octets - The total number of packets
(including bad packets) transmitted that were between 256 and 511
octets in length inclusive (excluding framing bits but including FCS
octets).
Packets Transmitted 512-1023 Octets - The total number of packets
(including bad packets) transmitted that were between 512 and 1023
octets in length inclusive (excluding framing bits but including FCS
octets).
Packets Transmitted 1024-1518 Octets - The total number of pack-
ets (including bad packets) transmitted that were between 1024 and
1518 octets in length inclusive (excluding framing bits but including
FCS octets).
Packets Transmitted 1519-1522 Octets - The total number of pack-
ets (including bad packets) transmitted that were between 1519 and
1522 octets in length inclusive (excluding framing bits but including
FCS octets).
Max Info - The maximum size of the Info (non-MAC) field that this
port will receive or transmit.

Hirschmann RS20 Specifications

General

Mounting	DIN Rail
Operating Temperature	-40°C to +70°C
Protection Class	IP30
Switching Technology	Store-and-Forward
Product Type	Industrial Ethernet Switch
Port Details	10/100 Mbps Ethernet ports
Switching Capacity	3.2 Gbps
MAC Address Table	8k
Management	Web, SNMP
Redundancy	MRP
Ports	8 or 16