Menus : Edit
27 - 603
Trim Fade In
Trim Fade Out
Trim Fade In X
(Symmetrically)
Trim Fade Out X (Symmetrically)
Trim Source In
Trim Source Out
Trim Sync Point
Slide Media
Previous Clip Trim Out
Previous Clip Trim Fade Out
Previous Clip Trim Fade Out X
(symmetrically)
Previous Clip Trim Source Out
Now simply move the jog wheel to Move, Trim, or Slide Media of the selected Clip(s)
Pressing the
Spacebar or Enter confirms the change(s), Esc cancels.
Editing Modes > Insert Mode >
Overwrite
When checked, any Clip placed so that it overlaps an existing Clip will overwrite the
part of that Clip where the two overlap.
Insert Track When checked, any Clip placed on a Track will be inserted into the Track and will rip-
ple all other material on the Track later in time (to the right) by the length of the Clip
being inserted.
Editing Modes > Remove Mode >
Remove
When checked any selected material will simply be removed from the Timeline.
Everything else will be left intact and in the same place.
Remove and Ripple When checked any selected material will be removed from the Timeline. Everything
else to the right (after) the removed material will be Rippled (moved) to the left (ear-
lier) to take up the space left by the removed material.
Editing Modes > Snap Mode >
Don’t Snap
No snap mode set. This mode doesn't affect the behavior of objects placed on a
Track. Behavior follows the existing Insert and Remove modes.
Head to End This mode will cause the beginning of any Clip placed on a Track to snap to the end
of the last Clip on the Track, abutting the head of the new Clip to the end (tail) of the
last Clip.
Tail to Beginning This mode will cause any Clip placed on a Track to snap to the beginning of the first
Clip on the Track, abutting the tail of the new Clip to the head of the first Clip.
Head to Nearest This mode will cause any Clip placed on a Track to snap the head of the Clip to the
nearest edit point or mark on the Track. This includes the head or tail of existing
Clips on the Track, as well as the Play Head Cursor, Mark In, Mark Out, Named Mark-
ers, or CD Marks. The Clip will interact with existing Clips according to the Insert
Mode setting.
Tail to Nearest This mode will cause any Clip placed on a Track to snap the tail of the Clip to the
nearest edit point or mark on the Track. This include the head or tail of existing Clips
on the Track, as well as the Play Head Cursor, Mark In, Mark Out, Named Markers, or
CD Marks. The Clip will interact with existing Clips according to the Insert Mode set-
ting.
Snap to Original TimeCode This mode will cause any Clip placed on a Track to snap the head of the Clip to the
time location represented by the Clips original TimeCode. The Clip will interact with
existing Clips according to the Insert Mode setting.
Library Editing
To Next Page
Loading...
