Settings : Remote Control
28 - 709
Sony 9 - Pin Protocol Configuration (Pyramix controlled by external device)
Device Request Settings
The Sony 9-pin P2 protocol transmits a code to identify the machine. Some machine controllers will do nothing or
exhibit aberrant behavior if they do not recognize the identifier code. Therefore, Pyramix can masquerade as
another device. The device identifier can be selected from a long list in the
Show the system as a: combo box.
Jog/Var/Shuttle Speeds Reinterpretation
The radio buttons determine Pyramix behavior when specific Jog/Var or Shuttle commands are received.
• Speed -1 into Reverse Playback
• Speed 0 into Stop
• Speed 1 into Playback
Note: When using a controller with a jog wheel please set Jog/Var/Shuttle ... Speed = 0.
Note: Interpreting a Sony reverse varispeed command as Reverse Playback is sometimes neces-
sary to achieve proper (locked to video) reverse playback.
Monitoring
Filter Monitoring Commands (EE On/Off) when ticked, E to E On and off commands are filtered out.
To Next Page
Loading...
