EasyManua.ls Logo

NEC Univerge SV9100 - Page 867

NEC Univerge SV9100
954 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Issue 4.0
SV9100 Programming Manual 2-827
12 0 0 MIS Link Error The link with MIS client PC
came off.
1. LAN cable
defective.
2. Connected HUB
broken.
3. The CTI server
doesn't start
normally.
1. Confirm MIS client
PC and connected
part.
2. Check with
manufacturer if the
problem occurs
again.
When the
connection
returns
normally, the
error is
recovered.
ERR
REC
13 0 0 Charge
Management
Link Error
The link with the charge
management device came
off.
1. Wiring problem
in connecting
main device with
charge
management
device.
2. PC Problem.
1. Confirm that there is
no problem in wiring
to connect a main
device with the
charge management
device. (Whether
ping passes for LAN
connection is
confirmed.)
2. Restart the charge
management
software.
3. Reboot PC, and start
charge management
software.
When the
connection
returns
normally, the
error is
recovered.
ERR
REC
14 0 0LAN Link
Error
The link with LAN on
GCD-CP10 came off.
1. LAN cable
defective.
2. Connected HUB
broken.
3. Defective
GCD-CP10.
Confirm the operation
of LAN connector, LAN
cable, and HUB again.
When the
connection
returns
normally, the
error is
recovered.
ERR
REC
15 0 0Network Keep
Alive
1. The network connection
has been cut.
2. Network Keep Alive
restoration.
3. Response notification on
network Keep Alive.
1. LAN cable is
defective.
2. Net side trouble.
3. Packet blocked
by firewall.
4. Repetition of IP
address.
1. Confirm that the
defect is on the
Network side.
2. Confirm the settings
of HUB and the
router, etc.
When the
connection
returns
normally, the
error is
recovered.
ERR
REC
WAR
16 0 0SMDR Link
17 1 0 Denial of
Service
The system received an
illegal packet.
Service outage
(DOS)
Confirm that the defect
is on the Network side.
WAR
18~21 --- Reserved ---
22
23
24 1 Voice Mail
25~28 --- Reserved ---
Alarm
No.
Type Report Name Content of Alarm Cause Action Recovery
Alarm
Status

Table of Contents

Other manuals for NEC Univerge SV9100

Related product manuals