JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
14.5 ip arp inspection recover
Description
The ip arp inspection recover command is used to restore a port to the ARP
transmit status from the ARP filter status.
Syntax
ip arp inspection recover
Command Mode
Interface Configuration Mode
Example
Restore Gigabit Ethernet port 1/0/5 to the ARP transmit status:
T3700G-52TQ(config)#interface gigabitEthernet 1/0/5
T3700G-52TQ(config-if)#ip arp inspection recover
14.6 show ip arp inspection
Description
The show ip arp inspection command is used to display the ARP detection
global configuration including the enable/disable status and the Trusted Port
list.
Syntax
show ip arp inspection
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the ARP detection configuration globally:
T3700G-52TQ(config)#show ip arp inspection
89
To Next Page
Loading...
