TP-Link JetStream T3700G-52TQ - Arp Retries

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Syntax
arp resptime resptime
no arp resptime
Parameter
resptime —— Specify the ARP request response timeout, ranging from 1 to
10 seconds. The default value is 1 seconds.
Command Mode
Global Configuration Mode
Example
Configure the ARP request response timeout as 3 seconds:
T3700G-52TQ(config)# arp resptime 3
49.5 arp retries
Description
This arp retries command is used to configure the maximum retry count of
ARP requests. To restore to the default value, please use the no arp retries
command.
Syntax
arp retries retries
no arp retries
Parameter
retries —— Specify the maximum retry count of ARP requests, ranging from 0
to 10. The default value is 4.
Command Mode
Global Configuration Mode
Example
Configure the maximum retry count of ARP requests as 3 seconds:
T3700G-52TQ(config)# arp retries 3
450