TP-Link JetStream T3700G-52TQ - Show Ip Pim Statistic

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
42.21 show ip pim statistic
Description
The show ip pim statistic command is used to display the statistics of the
PIM packets. Using the show ip pim statistic command without parameters
displays the detailed statistics of all the PIM interfaces.
Syntax
show ip pim statistic [ interface [{ fastEthernet | gigabitEthernet |
ten-gigabitEthernet }
port | vlanId vlan-id ] ]
Parameter
fastEthernet | gigabitEthernet | ten-gigabitEthernet —— The port type of the
interface.
port —— The port number.
vlan-id —— The interface VLAN ID, ranging from 1 to 4094.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the statistics of all PIM interfaces:
T3700G-52TQ(config)# show ip pim statistic
378