TP-Link JetStream T3700G-52TQ - Show Mac Address-Table Interface

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Parameter
all —— Displays the security information of all the Fast/Gigabit/ten-Gigabit
Ethernet ports.
port
—— The Fast/Gigabit/ten-Gigabit Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the security configuration of Gigabit Ethernet port 1/0/20:
T3700G-52TQ(config)#show mac address-table max-mac-count interface
gigabitEthernet 1/0/20
21.8 show mac address-table interface
Description
The show mac address-table interface command is used to display the
address configuration of an Ethernet port.
Syntax
show mac address-table interface { fastEthernet port | gigabitEthernet port
| ten-gigabitEthernet
port }
Parameter
port —— The Fast/Gigabit/ten-Gigabit Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the address configuration of Gigabit Ethernet port 1/0/1:
T3700G-52TQ(config)#show mac address-table interface gigabitEthernet
1/0/1
134