TP-Link JetStream T3700G-52TQ - Show Ip Route Ospf; Show Ip Ospf Area Database

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Syntax
show ip ospf [ process-id ] border-routers
Parameter
process-id —— The process ID, ranging from 1 to 65535. The ABR/ASBR
routing tables of all processes will be displayed if no process ID is specified.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the ABR/ASBR routing tables of all the OSPF processes:
T3700G-52TQ# show ip ospf border-routers
46.42 show ip route ospf
Description
The show ip route ospf command is used to display the OSPF routing table.
Syntax
show ip route ospf
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the routing tables of OSPF:
T3700G-52TQ# show ip route ospf
46.43 show ip ospf area database
Description
The show ip ospf area database command is used to display the LSDB of
the specified area. The detailed LSA information will be displayed if the LSA
type is specified. The LSDB summary information will be displayed if the LSA
type is not specified.
428