JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Command Mode
Privileged EXEC Mode
Example
Download the configuration file named as config to the switch as its startup
configuration file from TFTP server with the IP 192.168.0.148:
T3700G-52TQ#copy tftp startup-config ip-address 192.168.0.148
filename
config
22.18 copy usb
Description
The copy usb command is used to copy the configuration file from the USB
device to the switch as the startup configuration file.
Syntax
copy usb {
usb:filename
} startup-config
Parameter
usb:filename
āā Specify the configuration file location in the format of
usb://filepath/filename.
Command Mode
Privileged EXEC Mode
Example
Copy the configuration file named as l3 to the switch as its startup
configuration file from the USB device:
T3700G-52TQ# copy usb usb://building/l3.cfg startup-config
22.19 remove backup-image
Description
The remove backup-image command is used to delete the backup-image.
Syntax
remove backup-image [
unitid
]
150
To Next Page
Loading...
