JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
11.6 show etherchannel load-balance
Description
The show etherchannel load-balance command is used to display the
Aggregate Arithmetic of LAG.
Syntax
show etherchannel load-balance
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the Aggregate Arithmetic of LAG:
T3700G-52TQ(config)#show etherchannel load-balance
11.7 show lacp
Description
The show lacp command is used to display the LACP information for a
specified EtherChannel Group.
Syntax
show lacp [
channel-group-num
] { internal
|
neighbor }
Parameter
channel-group-num
—— The EtherChannel Group number, ranging from 1 to
32. By default, it is empty, and will display the information of all LACP groups.
internal —— The internal LACP information.
neighbor —— The neighbor LACP information.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the internal LACP information of EtherChannel Group 1:
T3700G-52TQ(config)#show lacp 1 internal
65
To Next Page
Loading...
