TP-Link JetStream T3700G-52TQ - Show Mac Address-Table Aging-Time; Show Mac Address-Table Max-Mac-Count

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Parameter
dynamic | static | filtering —— The type of your desired entry. By default all
the entries are displayed.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the information of all address entries:
T3700G-52TQ(config)#show mac address-table
21.6 show mac address-table aging-time
Description
The show mac address-table aging-time command is used to display the
Aging Time of the MAC address.
Syntax
show mac address-table aging-time
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the Aging Time of the MAC address:
T3700G-52TQ(config)#show mac address-table aging-time
21.7 show mac address-table max-mac-count
Description
The show mac address-table max-mac-count interface command is used
to display the security configuration of an Ethernet port or of all Fast/Gigabit
/ten-Gigabit Ethernet ports.
Syntax
show mac address-table max-mac-count { all | interface { fastEthernet port |
gigabitEthernet
port | ten-gigabitEthernet port } }
133