TP-Link JetStream T3700G-52TQ - Show Ip Igmp

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Syntax
ip igmp filter profile-id
no ip igmp filter
profile-id
Parameter
profile-id —— Specify the profile ID to be bound.
Command Mode
Interface Configuration Mode
Example
Bind profile 1 to the Interface VLAN 2:
T3700G-52TQ(config)# interface vlan 2
T3700G-52TQ(config-if)# ip igmp filter 1
Bind profile 1 to the routed port 1/0/1:
T3700G-52TQ(config)# interface gigabitEthernet 1/0/1
T3700G-52TQ(config-if)# no switchport
T3700G-52TQ(config-if)# ip igmp filter 1
41.17 show ip igmp
Description
The show ip igmp command is used to display the IGMP information.
Syntax
show ip igmp
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the IGMP information:
T3700G-52TQ(config)# show ip igmp
361