TP-Link JetStream T3700G-52TQ - Show Diffserv Service; Show Class-Map

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the policy summary information:
T3700G-52TQ(config)#show diffserv service brief
25.43 show diffserv service
Description
The show diffserv service command is used to display the information of
policy applied to the specific interface.
Syntax
show diffserv service interface-num {in | out}
Parameter
interface-num ——The Gigabit/Ten-Gigabit Ethernet port number.
in | out
——The traffic flow direction to which the policy is applied.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the information of policy applied to port 1/0/10, the policy’s type is in:
T3700G-52TQ(config)#show diffserv service 1/0/10 in
25.44 show class-map
Description
The show class-map command is used to display the Diffserv class
information.
Syntax
show class-map [ class-map-name ]
Parameter
class-map-name —— The name of an existing DiffServ class, ranging from 1
to 31 characters.
209