TP-Link JetStream T3700G-52TQ - Revision; Spanning-Tree Mst Instance

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
30.8 revision
Description
The revision command is used to configure the revision level of MST
instance.
Syntax
revision revision
Parameters
revision —— The revision level for MST region identification, ranging from 0
to 65535.
Command Mode
MST Configuration Mode
Example
Configure the revision level of MST as 100:
T3700G-52TQ(config)#spanning-tree mst configuration
T3700G-52TQ(config-mst)#revision 100
30.9 spanning-tree mst instance
Description
The spanning-tree mst instance command is used to configure the priority
of MST instance. To return to the default value of MST instance priority,
please use no spanning-tree mst instance command.
Syntax
spanning-tree mst instance instance-id priority priority
no spanning-tree mst instance instance-id priority
Parameter
instance-id —— Instance ID, ranging from 1 to 8.
priority —— MSTI Priority, which must be multiple of 4096 ranging from 0 to
61440. By default, it is 32768. MSTI priority is an important criterion on
determining if the switch will be chosen as the root bridge in the specific
instance.
Command Mode
Global Configuration Mode
238