JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
19.6 ip ssh download
Description
The ip ssh download command is used to download the SSH key file from
TFTP server.
Syntax
ip ssh download { rsa-v1 | rsa-v2 | dsa }
key-file
ip-address
ip-addr
Parameter
rsa-v1 | rsa-v2 | dsa —— Select the type of SSH key to download, rsa-v1
represents SSH-1 RSA, rsa-v2 represents SSH-2 RSA, dsa represents SSH-2
DSA.
key-file
—— The name of the key-file which is selected to download. The
length of the name ranges from 1 to 25 characters. The key length of the
downloaded file must be in the range of 512 to 3072 bits.
ip-addr
—— The IP address of the TFTP server. Both IPv4 and IPv6 addresses
are supported, for example 192.168.0.1 or fe80::1234.
Command Mode
Global Configuration Mode
Example
Download an SSH-1 type key file named ssh-key from TFTP server with the IP
address 192.168.0.148:
T3700G-52TQ(config)# ip ssh download rsa-v1 ssh-key ip-address
192.168.0.148
Download an SSH-1 type key file named ssh-key from TFTP server with the IP
address fe80::1234:
T3700G-52TQ(config)# ip ssh download rsa-v1 ssh-key ip-address
fe80::1234
19.7 crypto key generate
Description
The crypto key generate command is used to generate the DSA key or RSA
key for SSH. The new key files will overwrite any existing generated or
118
To Next Page
Loading...
