TP-Link JetStream T3700G-52TQ - Arp Timeout; Arp Resptime

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Syntax
clear arp-cache
Command Mode
Privileged EXEC Mode
Example
Clear all the dynamic ARP entries:
T3700G-52TQ (config)# clear arp-cache
49.3 arp timeout
Description
This arp timeout command is used to configure the ARP aging time. To
restore to the default value, please use the no arp timeout command.
Syntax
arp timeout timeout
no arp timeout
Parameter
timeout —— Specify the aging time, ranging from 15 to 21600 seconds. The
default value is 1200 seconds.
Command Mode
Global Configuration Mode
Example
Configure the ARP aging time as 60 seconds:
T3700G-52TQ(config)# arp timeout 60
49.4 arp resptime
Description
This arp resptime command is used to configure the ARP request response
timeout. To restore to the default value, please use the no arp resptime
command.
449