TP-Link JetStream T3700G-52TQ - Show Loopback-Detection Interface

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
global status, loopback detection interval and loopback detection recovery
time.
Syntax
show loopback-detection global
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the global configuration of loopback detection function:
T3700G-52TQ# show loopback-detection global
28.8 show loopback-detection interface
Description
The show loopback-detection interface command is used to display the
configuration of loopback detection function and the status of the specified
Ethernet port.
Syntax
show loopback-detection interface [ fastEthernet port | gigabitEthernet
port | ten-gigabitEthernet port | port-channel port-channel-id ]
Parameter
port —— The Ethernet port number.
port-channel-id —— The ID of the port channel.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the configuration of loopback detection function and the status of all
ports:
T3700G-52TQ# show loopback-detection interface
Display the configuration of loopback detection function and the status of
port 5:
T3700G-52TQ# show loopback-detection interface gigabitEthernet 1/0/5
221