TP-Link JetStream T3700G-52TQ - Show Ip Arp (Interface); Show Ip Arp Summary

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
49.8 show ip arp (interface)
Description
This show arp command is used to display the active ARP entries associated
with a specified Layer 3 interface.
Syntax
show ip arp { fastEthernet port | gigabitEthernet port | port-channel lagid |
vlan id }
Parameter
port —— Specify the number of the routed port.
lagid —— Specify the ID of the LAG.
id —— Specify the VLAN interface ID.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the ARP entry associated with VLAN interface 2 :
T3700G-52TQ(config)# show ip arp vlan 2
49.9 show ip arp summary
Description
This show ip arp summary command is used to display the number of the
active ARP entries.
Syntax
show ip arp summary
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the number of the ARP entries:
T3700G-52TQ(config)# show ip arp summary
452