JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
UTC+08:00—— TimeZone for Beijing, Chongqing, Hong Kong, Urumqi,
Singapore.
UTC+09:00 —— TimeZone for Seoul, Irkutsk, Osaka, Sapporo, Tokyo.
UTC+09:30 —— TimeZone for Darwin, Adelaide.
UTC+10:00 —— TimeZone for Canberra, Melbourne, Sydney, Brisbane.
UTC+11:00 —— TimeZone for Solomon Is., New Caledonia, Vladivostok.
UTC+12:00 —— TimeZone for Fiji, Magadan, Auckland, Wellington.
UTC+13:00 —— TimeZone for Nuku'alofa, Samoa.
ntp-server
—— The IP address for the Primary NTP Server.
backup-ntp-server
—— The IP address for the Secondary NTP Server.
Command Mode
Global Configuration Mode
Example
Configure the system time mode as NTP, the time zone is UTC-12:00, the
primary NTP server is 133.100.9.2 and the secondary NTP server is
139.78.100.163:
T3700G-52TQ(config)# system-time ntp UTC-12:00 133.100.9.2
139.79.100.163
22.3 system-time dst predefined
Description
The system-time dst predefined command is used to select a predefined
DST configuration and the configuration can be recycled.
Syntax
system-time dst predefined USA
| Europe
Parameter
USA
| Europe —— Predefined DST mode, with two options: USA and Europe.
By default, the setting is “Europe”.
The DST time periods which the two predefined DST mode represents are
displayed as follow:
USA: Second Sunday in March, 02:00 – First Sunday in November, 02:00.
Europe: Last Sunday in March, 01:00 - Last Sunday in October, 01:00.
140
To Next Page
Loading...
