TP-Link JetStream T3700G-52TQ - Show Policy-Map; Show Policy-Map Interface

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the information of all the Diffserv classes:
T3700G-52TQ(config)#show class-map
25.45 show policy-map
Description
The show policy-map command is used to display the Diffserv policy
information.
Syntax
show policy-map [ policy-map-name ]
Parameter
policy-map-name —— The name of an existing DiffServ policy, ranging from
1 to 31 characters.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the information of all the Diffserv policys:
T3700G-52TQ(config)#show policy-map
25.46 show policy-map interface
Description
The show policy-map interface command is used to display the information
of policy applied to the specific interface.
Syntax
show policy-map interface interface-num {in | out}
Parameter
interface-num ——The Gigabit/Ten-Gigabit Ethernet port number.
in | out
——The traffic flow direction to which the policy is applied.
210