TP-Link JetStream T3700G-52TQ - Show Ip Pim Neighbor

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
Syntax
show ip pim interface [{ fastEthernet | gigabitEthernet | ten-gigabitEthernet }
port | vlanId vlan-id ]
Parameter
fastEthernet | gigabitEthernet | ten-gigabitEthernet —— The port type of the
interface.
port —— The port number.
vlan-id —— The interface VLAN ID, ranging from 1 to 4094.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the information of all PIM interfaces:
T3700G-52TQ(config)# show ip pim interface
42.16 show ip pim neighbor
Description
The show ip pim neighbor command is used to display PIM neighbor
information.
Syntax
show ip pim neighbor [ interface [ { fastEthernet | gigabitEthernet |
ten-gigabitEthernet } port | vlanId vlan-id ] ]
Parameter
fastEthernet | gigabitEthernet | ten-gigabitEthernet —— The port type of the
interface.
port —— The port number.
vlan-id —— The interface VLAN ID.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the information of all the PIM neighbors:
375