JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
14.7 show ip arp inspection interface
Description
The show ip arp inspection interface command is used to display the
interface configuration of ARP detection.
Syntax
show ip arp inspection interface [ gigabitEthernet
port
|
ten-gigabitEthernet
port
]
Parameter
port
——The Ethernet port number.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the configuration of Gigabit Ethernet port 1/0/1:
T3700G-52TQ(config)#show ip arp inspection interface gigabitEthernet
1/0/1
Display the configuration of all Ethernet ports:
T3700G-52TQ(config)#show ip arp inspection interface
14.8 show ip arp inspection statistics
Description
The show ip arp inspection statistics command is used to display the
number of the illegal ARP packets received.
Syntax
show ip arp inspection statistics
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the number of the illegal ARP packets received:
90
To Next Page
Loading...
