JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
43.2 show ip mroute static
Description
The show ip mroute static command is used to display all the static multicast
routing entries.
Syntax
show ip mroute static [ source
source-ip
]
Parameter
source-ip
āā Displays the static multicast routing entries with specified
source IP address.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Displays all the static multicast routing entries:
T3700G-52TQ(config)# show ip mroute static
380
To Next Page
Loading...
