TP-Link JetStream T3700G-52TQ - Access-List Bind Acl(Vlan); Access-List Resequence

T3700G-52TQ
JetStream 52-Port Gigabit Stackable L3 Managed Switch CLI Guide
T3700G-52TQ(config)#interface gigabitEthernet 1/0/2
T3700G-52TQ(config-if)#access-list bind acl acl1
29.10 access-list bind acl(vlan)
Description
The access-list bind acl command is used to bind the ACL to a specified
VLAN. To cancel the bind relation, please use no access-list bind acl
command.
Syntax
access-list bind acl acl
no access-list bind acl
acl
Parameter
acl —— The name or ID of the ACL.
Command Mode
Interface VLAN Mode
Example
Bind acl1 to VLAN 2:
T3700G-52TQ(config)#interface vlan 2
T3700G-52TQ(config-if)#access-list bind acl acl1
29.11 access-list resequence
Description
The access-list resequence command is used to resequence rules of the
ACL.
Syntax
access-list resequence acl sequence-start sequence-step
Parameter
acl —— The name or ID of the ACL.
sequence-start —— Specify the starting sequence number for resequencing
the existing rules. It ranges from 1 to 2147483647.
sequence-step —— Specify the increment of sequence numbers for
resequencing the existing rules. It ranges from 1 to 2147483647.
230